PRODUCTS

M100Magnum

ROUND BALER

M100 SUPER - M100 MAGNUM

The ABBRIATA® M100 SUPER and M100 MAGNUM  round balers are fitted with a fixed compression chamber with 27 cross-bars, producing cylindrical bales with diameter of 100 cm and width of 100 cm.

 

The binding and compression system using chains and cross-bars permit baling all types of green and dry crops in cylindrical bales with soft centres, resulting in better conservation of the material due to ventilation from the chimney effect in the bale as well as the formation of a more compressed superficial layer providing better protection for the bale from atmospheric agents.
The binding and compression system is composed of 27 steel cross-bars that rotate through a chain system in a completely closed fixed chamber. This system is one of the most common and in respect to belt and/or roller systems it has many advantages.
Some of these are: reduced waste, reduced maintenance, less power absorption, especially suitable for baling green crops.

An alternative high production capacity packer “delicately” introduces the crops into the machine, preserving their maximum nutritional qualities. The door’s mechanical closure and an easy, wide ranging possibility to adjust compression permits obtaining the desired density, which if requested can be quite high and superior to that of other machines of the same category.

The compact size (total machine width of only 180 cm), moderate weight, limited drive power and production of smaller size bales (Ø 100x100 cm) that are easier to move and store render the use of this machine especially suitable in mountainous areas and in smaller spaces in general.

The machine can also be used for baling vine cuttings if fitted with the special “vine cutting kit”.

Automatic mono-twine, double-twine and net binders are also available.

The machines can be supplied in the MAGNUM version fitted with an extra-wide pick-up device with side mounted feed augers.

STANDARD EQUIPMENT:

Quick hydraulic opening of the rear gate without disabling the power takeoff - mechanic lock - Hydraulic pick-up lift - Packer device - Changeable wheel-track - Adjustable drawbar - Bale counter - Lights (complete certification kit for Spain and Italy) - Cardan shaft with limiter - Retractable and adjustable small wheel of the pick-up  - Bale chute - Electrically driven automatic monotwine binding device - Binding control panel with signal horn + light

FOR MAGNUM ONLY:

Double retractable and adjustable pneumatic wheel for pick-up - Extra-wide pick-up with side augers - Double hydraulic piston for pick-up lifting                             

SPECIAL EQUIPMENT:

Electrically driven net binding – (in the case of “M100”, not provided in combination with twine binder) - Electrically driven double twine binding - Additional adjustable wheel for pick-up, made entirely of rubber - Double adjustable pneumatic pick-up wheel -  Wide-angle cardan shaft  - Hydraulic brake

Bale size cm Ø 100 x 100 / in Ø 39.3 x 39.3
Pick-up width cm 145 / in 57
Chain shafts n° 27
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 180 [195] x 302 x 177 / in 70.8 [76.7] x 129.9 x 72.8 225 x 302 x 177
Weight Kg 1590 / lb 3,490
Tyres 7.50-16 [or 11.5-80/15]
Bale size cm Ø 100 x 100 / in Ø 39.3 x 39.3
Pick-up width cm 165 (with lateral augers) / in 64.9
Chain shafts n° 27
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 225 x 302 x 177 / in 88.5 x 129.9 x 72.8
Weight Kg 1650 / lb 3636
Tyres 11.5-80/15
Bale size cm Ø 120 x 100 / in Ø 47.3 x 39.3
Pick-up width cm 145 / in 57
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 180 x 330 x 185 / in 70.8 x 129.9 x 72.8
Weight Kg 1650 / lb 3636
Tyres 7.50-16
Bale size cm Ø 120 x 100 / in Ø 47.3 x 39.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 225 x 330 x 185 / in 88.5 x 129.9 x 72.8
Weight Kg 1720 / lb 3792
Tyres 11.5-80/15
Bale size cm Ø 120 x 120 / in Ø 47.3 x 47.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 215 x 330 x 185 / in 84.6 x 129.9 x 72.8
Weight Kg 1850 / lb 4077
Tyres 11.5-80/15
Bale size cm Ø 120 x 120 / in Ø 47.3 x 47.3
Pick-up width cm 185 / in 72.8
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 60
Dimensions: (W x L x H) cm 245 x 330 x 197 / in 96.5 x 129.9 x 77.5
Weight Kg 2200 / lb 4859
Tyres 11.5-80/15
Bale size cm Ø 150 x 120 / in Ø 59 x 47.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 41
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 215 x 357 x 220 / in 84.6 x 140.5 x 86.6
Weight Kg 2100 / lb 4628
Tyres 11.5-80/15
Bale size cm Ø 150 x 120 / in Ø 59 x 47.3
Pick-up width cm 185 / in 72.8
Chain shafts n° 41
P.T.O. Rpm 540
Power Required CV 60
Dimensions: (W x L x H) cm 245 x 357 x 232 / in 96.5 x 140.5 x 91.3
Weight Kg 2450 / lb 5401
Tyres 11.5-80/15