PRODUCTS

M120Super Plus

ROUND BALER

M120 SUPER PLUS - M120 MAGNUM PLUS

The ABBRIATA® M120 SUPER PLUS and M120 MAGNUM PLUS round balers are fitted with a fixed compression chamber with 31 cross-bars, producing cylindrical bales with diameter of 120 cm and width of 120 cm.
 

The binding and compression system using chains and cross-rods permit baling all types of green and dry crops in cylindrical bales with soft centres, resulting in better conservation of the material due to ventilation from the chimney effect in the bale as well as the formation of a more compressed superficial layer providing better protection for the bale from atmospheric agents.
The binding and compression system is composed of 31 steel cross-bars that rotate through a chain system in a completely closed fixed chamber. This system is one of the most common and in respect to belt and/or roller systems it has many advantages. Some of these are: reduced waste, reduced maintenance, less power absorption, especially suitable for baling green crops.

An alternative high production capacity packer “delicately” introduces the crops into the machine, preserving their maximum nutritional qualities. The door’s mechanical closure and an easy, wide ranging possibility to adjust compression permits obtaining the desired density, which if requested can be quite high and superior to that of other machines of the same category.

Its compact size, light weight, limited drive power and production of compact bales (Ø 120x120 cm) that are easier to move and store render the use of this machine especially indicated for companies that do not commercialize the product, and require cylindrical bales that are not bulky, with a preference for using a more compact, lighter machine.

Automatic mono-twine, double-twine and net binders are also available.

The machines can be supplied in the MAGNUM version fitted with an extra-wide pick-up device with side mounted feed augers.

STANDARD EQUIPMENT:

Quick hydraulic opening of the rear gate without disabling the power takeoff - mechanic lock - Hydraulic pick-up lift - Packer device - Changeable wheel-track - Adjustable drawbar - Bale counter - Lights (complete certification kit for Spain and Italy) - Cardan shaft with limiter - Retractable and adjustable small wheel of the pick-up  - Bale chute - Electrically driven automatic monotwine binding device - Binding control panel with signal horn + light

FOR MAGNUM ONLY:

Double retractable and adjustable pneumatic wheel for pick-up - Extra-wide pick-up with side augers (pick-up width = 185 cm) - Double hydraulic piston for pick-up lifting                             

SPECIAL EQUIPMENT:

Electrically driven net binding  - Electrically driven double twine binding - Electrically driven double binder with crossing twine - Additional adjustable wheel for pick-up, made entirely of rubber - Double adjustable pneumatic pick-up wheel - 400/60 15.5 PR14 oversize wheels -  Wide-angle cardan shaft - Hydraulic brake

FOR MAGNUM ONLY:

Extra-wide pick-up with side augers (pick-up width = 200 cm)

Bale size cm Ø 100 x 100 / in Ø 39.3 x 39.3
Pick-up width cm 145 / in 57
Chain shafts n° 27
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 180 [195] x 302 x 177 / in 70.8 [76.7] x 129.9 x 72.8 225 x 302 x 177
Weight Kg 1590 / lb 3,490
Tyres 7.50-16 [or 11.5-80/15]
Bale size cm Ø 100 x 100 / in Ø 39.3 x 39.3
Pick-up width cm 165 (with lateral augers) / in 64.9
Chain shafts n° 27
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 225 x 302 x 177 / in 88.5 x 129.9 x 72.8
Weight Kg 1650 / lb 3636
Tyres 11.5-80/15
Bale size cm Ø 120 x 100 / in Ø 47.3 x 39.3
Pick-up width cm 145 / in 57
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 40/45
Dimensions: (W x L x H) cm 180 x 330 x 185 / in 70.8 x 129.9 x 72.8
Weight Kg 1650 / lb 3636
Tyres 7.50-16
Bale size cm Ø 120 x 100 / in Ø 47.3 x 39.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 225 x 330 x 185 / in 88.5 x 129.9 x 72.8
Weight Kg 1720 / lb 3792
Tyres 11.5-80/15
Bale size cm Ø 120 x 120 / in Ø 47.3 x 47.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 215 x 330 x 185 / in 84.6 x 129.9 x 72.8
Weight Kg 1850 / lb 4077
Tyres 11.5-80/15
Bale size cm Ø 120 x 120 / in Ø 47.3 x 47.3
Pick-up width cm 185 / in 72.8
Chain shafts n° 31
P.T.O. Rpm 540
Power Required CV 60
Dimensions: (W x L x H) cm 245 x 330 x 197 / in 96.5 x 129.9 x 77.5
Weight Kg 2200 / lb 4859
Tyres 11.5-80/15
Bale size cm Ø 150 x 120 / in Ø 59 x 47.3
Pick-up width cm 165 / in 64.9
Chain shafts n° 41
P.T.O. Rpm 540
Power Required CV 50
Dimensions: (W x L x H) cm 215 x 357 x 220 / in 84.6 x 140.5 x 86.6
Weight Kg 2100 / lb 4628
Tyres 11.5-80/15
Bale size cm Ø 150 x 120 / in Ø 59 x 47.3
Pick-up width cm 185 / in 72.8
Chain shafts n° 41
P.T.O. Rpm 540
Power Required CV 60
Dimensions: (W x L x H) cm 245 x 357 x 232 / in 96.5 x 140.5 x 91.3
Weight Kg 2450 / lb 5401
Tyres 11.5-80/15